ML-600S CNC Lathe is a high performance turning center that combines traditional slant bed design with the speed and accuracy of linear ways. The ML-600S is suitable for high production as well as low volume prototype and mold work. The alpha 30ip spindle motor is designed for high torque at low RPM for heavy roughing and drilling, and 3500 RPM maximum speed with full horsepower for quick acceleration / deceleration, less vibration, and extraordinary finishes.

  • Compact size 231" x 77" maximize shop floor space.
  • Swivel-type operators panel for quick, convenient set-ups.
  • Latest three point support spindle design offers maximum rigidity and precision.
  • Rapid traverse rates of 1,180 IPM through linear way design techniques.
  • Net weight over 11,968 lbs. provides solid machining operation.
  • Available with 8" or 10" Hydraulic chuck.
Swing Over Bed (600mm) 23.62"
Swing Over Cross Slide (450mm) 17.72"
Maximum Turning Diameter x Full Length (420mmx560mm) 16.54" x 22"
Distance Between Center (629mm) 24.76"
Travel X Axis (230mm) 9.05"
Travel Z Axis (600mm) 23.62"
Rapid Travel X, Z (30m/min) 1,180ipm
Bar Capacity (75mm) 2.95"
Spindle Bore (86mm) 3.39"
Spindle Nose A2-8
Spindle Motor (15/18.5KW) 20/25HP
Spindle Speed 3500RPM
Spindle Bearing Diameter (120mm) 4.72"
No. of Station 12
Turning Tool Shank Size 1"
Boring Bar Holder Size 1.75"
Tailstock Quill Diameter (85mm) 3.35"
Tailstock Quill Travel (367mm) 1.97"
Tailstock Quill Taper M.T.4
Floor Space (L x W x H) (2870mmx1953mmx1844mm) 231"x77"x 72.60"
Machine Weight (5430kg) 11,968 lb
Power Requirement 220V, 3 Phase, 60Hz, 100Amp

All Specification are subject to change without prior notice

Standard Accessories Optional Accessories
10" 3 Jaw Hydraulic Chuck Live Tooling with C Axis
12 Station Hydraulic Turret Auto Tool Presetter
6 Set of Boring Bar Holder & 2 OD Holder Auto Door Open / Close
6 Set of Wedge Type Tool Clamps Parts Catcher
One Set of Hard Jaw & Soft Jaws Bar Feeder Interface
Manual Guide 0i & Manual Tool Setter Royal Live Center
Chain Type Chip Conveyor & Cart Royal 5C Collet Chuck
Programmable Tailstock Quill Royal 16C Collet Chuck
Auto Lubrication System Royal 3J Collet Chuck
Heat Exchanger for Electrical Cabinet Steel Soft Jaw for 10" Chuck
Operator, Maintenance, Electrical & Part Manual Y Axis
Fanuc Operator & Maintenance Manual Sub Spindle