CNC Turning Center

YLM-6

YLM-8A

YLM-10A

ML-560M

ML-600S

ML-850

ML-560M

ML-560M CNC Lathe offers a 4500 RPM spindle with a 8” chuck making it perfect for high production or bar work. The high torque single range spindle motor and no backlash ballscrews directly coupled to the servo motors offer the smoothest and fastest, combined with the adjustable tailstock body and programmable hydraulic quill, this is one of the most versatile machines on the market. The full length, cast slant bed offers the rigidity and cutting ability of much larger machines, but leaves a smaller footprint.

22" swing, ASA A2-6 spindle nose, 10/15 HP, 8" chuck

Specifications
Swing Over Bed (560mm) 22"
Swing Over Cross Slide (420mm) 16.54"
Maximum Turning Diameter x Full Length (320mmx570mm) 12.60" x 22.44"
Distance Between Center (750mm) 29.53"
Travel X Axis (190mm) 7.48"
Travel Z Axis (610mm) 24"
Rapid Travel X, Z (30m/min) 1,180ipm
Bar Capacity (52mm) 2.04"
Spindle Bore (62mm) 2.44"
Spindle Nose A2-6
Spindle Motor (7.5/11KW) 11/15HP
Spindle Speed 4500RPM
Spindle Bearing Diameter (100mm) 3.94"
No. of Station 12
Turning Tool Shank Size 1"
Boring Bar Holder Size 1.75"
Tailstock Quill Diameter (65mm) 2.56"
Tailstock Quill Travel (50mm) 1.97"
Tailstock Quill Taper M.T.4
Floor Space (L x W x H) (3181mmx2053mmx1844mm) 125.24"x80.83"x 72.60"
Machine Weight (3660kg) 8,066 lb
Power Requirement 220V, 3 Phase, 60Hz, 50Amp
All Specification are subject to change without prior notice

Standard Accessories Optional Accessories
8" 3 Jaw Hydraulic Chuck Live Tooling with C Axis
12 Station Hydraulic Turret Auto Tool Presetter
5 Set of Boring Bar Holder & 2 OD Holder Auto Door Open / Close
6 Set of Wedge Type Tool Clamps Parts Catcher
One Set of Hard Jaw & Soft Jaws Bar Feeder Interface
Manual Guide 0i & Manual Tool Setter Royal Live Center
Chain Type Chip Conveyor & Cart Royal 5C Collet Chuck
Programmable Tailstock Body Royal 16C Collet Chuck
Auto Lubrication System Royal 3J Collet Chuck
Heat Exchanger for Electrical Cabinet Steel Soft Jaw for 8" Chuck
Operator, Maintenance, Electrical & Part Manual
Fanuc Operator & Maintenance Manual