HF-380A

HF-380A

  • High-tensile Meehanite cast iron on all major parts, with 3 layers T shape box type one piece base design provides best rigidity and superior accuracy stability.
  • Multi-layers and enforce-rib design on base unit structure prevent any deformation and greatly reduce machining vibration during high speed operation.
  • Special differential-slide base design, Special High-Low level X axis guide way design with 580mm wide span providing best stability and resistance of column motion during high speed machining
  • Superior high speed axial federate, Optional 45mm diameter P20 coolant through ballscrew design on all 3 axes provides highest rapid federate 48000mm/min with minimum heat deformation during high speed operation
  • Large Span Design, 720mm extra wide span between Z axis slides provides most stable movement and heavy machining operation support.
  • Built-in spindle design, high torque build-in type direct drive spindle with P4 grade angular contact bearings in maximum loading support arrangement set up. Standard external spindle cooling system, air lock system on spindle nose and floating tool clamp/unclamp system provide lowest noise, minimum vibration and highly stable performance in high speed operation.
  • Automatic 2 pallet change system, high precision APC system adopts one-by-one table exchange way with table exchange time 11 seconds.
Specification  
Travel X Axis (500mm) 19.68"
Travel Y Axis (420mm) 16.53"
Travel Z Axis (380mm) 15"
Rapid Deed Rate X, Y and Z Axis (48000mm/min) 1,890ipm
Cutting Feed Rate (20000mm/min) 787ipm
Spindle Nose to Table Center (min./max.) (70-450mm) 2.76" - 17.72"
Spindle Center to Table Surface (80-500mm) 3.15" - 19.70"
Table Dimension (380x380mm) 15" x 15"
Maximum Loading (200Kg) 4400 lb
Table Index Resolution
Index Speed 3.6 sec / rev.
Spindle Taper CAT-40
Spindle Motor (11/15KW) 15/20HP
Spindle Speed 12000RPM
Tool Selection Shortest Path, Bi-Direction random type
Magazine Capacity Arm Type 16
Tool Change Time 2 sec
Maximum Tool Dia. (76mm) 2.99"
Maximum Tool Length (250mm) 9.84"
Maximum Tool Weight (7.0Kg) 15.4 lb
Floor Space W x D x H (1500x2500x2450mm) 85.82"x98.74"x106"
Power Requirement 220V, 3 Phase, 60Hz, 30KVA, 75Amp
Machine Weight (3500Kg) 7,700 lb

All Specification are subject to change without prior notice

Standard Accessories Optional Accessories
Arm Type 16 Tool ATC Data Server 2 GB (DNC)
Fanuc Oi-MF Plus, 10.4" Color LCD Coolant Through Spindle
2 MB Memory High Pressure Coolant System
PCMCIA Slot for Memory Expansion Fanuc 31i-F
Spindle Oil Refrigeration Unit Auto Tool Measuring System
Heat Exchanger for Electrical Cabinet Chip Flushing System
Auto Lubrication System  
Spindle Air Blast & Cutting Air Blast  
Spindle Air Curtain  
Fanuc & Machine Manual