ML-560M
Category: CNC Turning Center
ML-560M CNC Lathe offers a 4500 RPM spindle with a 8" chuck making it perfect for high production or bar work. The high torque single range spindle motor and no backlash ballscrews directly coupled to the servo motors offer the smoothest and fastest, combined with the adjustable tailstock body and programmable hydraulic quill, this is one of the most versatile machines on the market. The full length, cast slant bed offers the rigidity and cutting ability of much larger machines, but leaves a smaller footprint.
- X and Z axis linear guideways provide high accuracy, rigidity and rapid traverse rates.
- Swivel-type operators panel for quick, convenient set-ups.
- 30 degree slant bed construction facilitates chip flow for trouble-free operation.
- Compact size 125" x 80" maximizes shop floor space.
- Rapid traverse rates of 1,180 IPM through linear way design techniques.
- Roll-out chip conveyor and coolant tank for easy coolant system maintenance.
| Specifications | |
|---|---|
| Swing Over Bed | (560mm) 22" |
| Swing Over Cross Slide | (420mm) 16.54" |
| Maximum Turning Diameter x Full Length | (320mmx570mm) 12.60" x 22.44" |
| Distance Between Center | (750mm) 29.53" |
| Travel X Axis | (190mm) 7.48" |
| Travel Z Axis | (610mm) 24" |
| Rapid Travel X, Z | (30m/min) 1,180ipm |
| Bar Capacity | (52mm) 2.04" |
| Spindle Bore | (62mm) 2.44" |
| Spindle Nose | A2-6 |
| Spindle Motor | (7.5/11KW) 11/15HP |
| Spindle Speed | 4500RPM |
| Spindle Bearing Diameter | (100mm) 3.94" |
| No. of Station | 12 |
| Turning Tool Shank Size | 1" |
| Boring Bar Holder Size | 1.75" |
| Tailstock Quill Diameter | (65mm) 2.56" |
| Tailstock Quill Travel | (50mm) 1.97" |
| Tailstock Quill Taper | M.T.4 |
| Floor Space (L x W x H) | (3181mmx2053mmx1844mm) 125.24"x80.83"x 72.60" |
| Machine Weight | (4170kg) 9,193 lb |
| Power Requirement | 220V, 3 Phase, 60Hz, 50Amp |
All Specification are subject to change without prior notice
| Standard Accessories | Optional Accessories |
|---|---|
| 8" 3 Jaw Hydraulic Chuck | Live Tooling with C Axis |
| 12 Station Hydraulic Turret | Auto Tool Presetter |
| 5 Set of Boring Bar Holder & 2 OD Holder | Auto Door Open / Close |
| 6 Set of Wedge Type Tool Clamps | Parts Catcher |
| One Set of Hard Jaw & Soft Jaws | Bar Feeder Interface |
| Manual Guide 0i & Manual Tool Setter | Royal Live Center |
| Chain Type Chip Conveyor & Cart | Royal 5C Collet Chuck |
| Programmable Tailstock Body | Royal 16C Collet Chuck |
| Auto Lubrication System | Royal 3J Collet Chuck |
| Heat Exchanger for Electrical Cabinet | Steel Soft Jaw for 8" Chuck |
| Operator, Maintenance, Electrical & Part Manual | Sub Spindle |
| Fanuc Operator & Maintenance Manual |
